Passer au contenu

How to Identify an Industrial Robot Spare Part from a Nameplate or Photo

When an industrial robot spare part fails, identifying the correct replacement is not always straightforward.

The original part number may be difficult to read, the product label may be damaged, or the maintenance team may only have a photograph of the component installed inside the robot controller.

For purchasing teams and maintenance engineers, this creates an important challenge: how can you identify the correct industrial robot spare part before requesting a replacement?

A nameplate or product photo can provide valuable information, including the manufacturer, model number, electrical specifications, hardware revision, and connector type.

However, not every visible number is a part number, and two components that look almost identical may have different technical specifications.

This guide explains how to identify industrial robot spare parts using nameplates, labels, product photos, and equipment information.

1. Start with the Product Nameplate or Identification Label

The nameplate is usually the most reliable starting point when identifying an industrial robot component.

Depending on the manufacturer and product type, the label may contain several identifiers.

Common information includes:

Label Information What It Tells You
Part Number Identifies the specific component or assembly
Model Number Identifies the product model or series
Serial Number Identifies an individual manufactured unit
Manufacturer Identifies the original manufacturer
Hardware Revision Indicates a particular hardware version
Electrical Rating Shows voltage, current, power, or other specifications
Date Code May indicate the manufacturing date or production batch

Part number vs. model number

These two identifiers should not be confused.

A model number may identify a product family, while a part number may identify a specific assembly, configuration, or replacement component.

For example, a servo amplifier may have a model designation identifying its series and a separate ordering or assembly number identifying the exact version.

When requesting a replacement, provide the complete identification information rather than relying on the product family name alone.

Photograph the entire label

Before trying to interpret individual characters, take a clear photograph of the complete label.

Make sure the image includes:

  • The full part number

  • Model designation

  • Manufacturer name or logo

  • Revision information

  • Electrical ratings, if shown

  • Any additional suffixes or identification codes

Do not crop away the characters before or after the main number. A single letter or suffix can distinguish different product versions.

2. Understand Where to Find Identification Numbers on Different Robot Parts

Industrial robot spare parts do not all use the same labeling format.

The location and type of identification information depend on the component.

Teach Pendant and HMI

Industrial robot Teach Pendant showing its front keypad, rear identification label area, side profile, and cable connection.

For a Teach Pendant, check:

  • Rear housing label

  • Product identification sticker

  • Model designation

  • Part number

  • Serial number

  • Connector and cable interface

If the label is missing, photograph the front, rear, side profile, connector, and cable entry.

The screen layout and housing shape can help narrow down the product family, but appearance alone is not sufficient to confirm an exact replacement.

Robot Cables and Teach Pendant Cables

Industrial robot cable assembly showing both connectors, cable jacket markings, and connector identification details.

Cable identification can be more difficult because some cables have small printed markings along the jacket rather than a separate nameplate.

Look for:

  • Cable part number

  • Manufacturer markings

  • Cable assembly number

  • Connector type

  • Pin count

  • Cable length

  • Shielding or electrical markings, if available

Photograph both ends of the cable.

A cable may have different connectors at each end, and similar-looking connectors do not necessarily share the same pinout or electrical function.

Servo Drives and Servo Amplifiers

Industrial robot servo drive showing its model identification label, electrical rating area, and connector arrangement.

For servo drives and amplifiers, check:

  • Complete model number

  • Ordering or assembly number

  • Hardware revision

  • Input and output ratings

  • Compatible motor information, if available

  • Connector arrangement

Electrical specifications and motor compatibility matter just as much as the physical appearance.

A drive with a similar housing or power rating should not automatically be considered interchangeable.

Control Boards and PCB Modules

Industrial robot controller PCB showing its circuit board layout, barcode label area, connectors, and hardware revision marking location.

For robot control boards and electronic modules, look for identification labels on:

  • The PCB itself

  • Barcode stickers

  • Board edges

  • Component mounting plates

  • The front or rear of the assembly

Record all visible identification numbers, especially board numbers, assembly numbers, and revision markings.

A PCB may contain multiple numbers. Some identify the bare circuit board, while others identify the complete assembled module.

For replacement purposes, the complete assembly number and applicable revision are particularly important.

3. Use Product Photos When the Nameplate Is Missing or Unreadable

Sometimes the original label has been damaged, removed, or covered by dirt.

In these cases, product photographs can help narrow down the identification.

However, a photo should be treated as supporting evidence, not definitive proof of compatibility.

Take photos from multiple angles

For better identification, prepare the following images:

Photo What It Helps Identify
Front view Product type, display, buttons, overall design
Rear view Labels, model information, housing details
Side view Dimensions, mounting features, connectors
Connector close-up Connector shape, keying, pin arrangement
Label close-up Part number, revision, serial number
Installed view Location and application inside the equipment

Keep the connector details visible

Connectors are important identification features.

For a cable, pendant, or electronic module, photograph:

  • Connector shape

  • Number of pins or contacts

  • Keying and locking mechanism

  • Connector gender

  • Cable entry direction

  • Any visible connector markings

Do not assume that two connectors are compatible simply because they have the same number of pins or similar outer shapes.

Their wiring and electrical functions may differ.

Include a reference for physical size

When possible, include a ruler or another clear size reference in the photograph.

This can help distinguish components with similar appearances but different dimensions.

For electronic boards, also photograph the mounting holes, board outline, and connector positions.

4. Identify the Robot Brand and Controller Model

A component number or photograph may not provide enough information on its own.

The robot brand and controller model can help narrow down the possible replacement options.

For example, the same product category may have different versions across controller generations.

When identifying a component, record:

  • Robot manufacturer

  • Robot model

  • Controller model

  • Controller generation

  • Installed component location

  • Relevant system or hardware revision, if available

Why controller information matters

A Teach Pendant designed for one controller generation may not work with another.

Similarly, servo drives, control boards, communication modules, and cables may have different electrical interfaces or system requirements.

The robot brand alone is not enough to confirm compatibility.

For example, identifying a component as a FANUC, ABB, KUKA, or Yaskawa part only establishes its manufacturer family. The exact model and controller information are still needed.

If the original part number is incomplete, controller information can provide useful supporting evidence during the identification process.

5. Check All Part Numbers, Suffixes, and Hardware Revisions

One of the most common identification mistakes is recording only part of a number.

Industrial robot components may have several similar-looking identifiers.

A small difference in a suffix, revision, or assembly number can indicate a different product configuration.

Before requesting a replacement, compare:

  1. Complete part number

  2. Model designation

  3. Hardware revision

  4. Assembly number

  5. Electrical specifications

  6. Connector arrangement

  7. Controller compatibility

Do not rely on similar part numbers

Two parts with similar numbers may belong to the same product family but have different functions or specifications.

Likewise, a newer revision is not automatically a direct replacement for an older revision.

Before accepting an alternative, request confirmation based on manufacturer documentation, an approved supersession, or other reliable technical evidence.

For more information, see:

Can Two Robot Parts with Similar Part Numbers Be Interchanged?

6. Use OCR and Image Recognition to Read Difficult Labels

When a label contains small printed characters, OCR (Optical Character Recognition) can help extract the text from an image.

This can be useful when dealing with:

  • Small PCB identification stickers

  • Faded product labels

  • Barcode labels

  • Printed cable markings

  • Long alphanumeric part numbers

AI image recognition tools can also help describe a component's visible features or suggest possible product categories.

However, automated identification has limitations.

A recognition tool may confuse:

  • The letter O with the number 0

  • The letter I with the number 1

  • The letter S with the number 5

  • Similar-looking suffixes

  • Board numbers with assembly numbers

Recommended identification workflow

Use the following process:

  1. Take a high-resolution photograph.

  2. Crop the label without removing surrounding context.

  3. Use OCR to extract the visible characters.

  4. Compare the extracted text with the original image.

  5. Check the number against manufacturer or supplier information.

  6. Confirm the robot and controller model.

  7. Verify compatibility before ordering.

Never copy an OCR result directly into a purchase order without checking the original label.

A single incorrect character can lead to an incorrect quotation or replacement.

7. What If You Cannot Identify the Exact Part Number?

You do not always need to know the complete part number before starting a sourcing request.

If the label is missing or unreadable, provide as much supporting information as possible.

A supplier may be able to narrow down the identification using the product appearance, robot model, controller information, connector details, and installation location.

Use the following checklist:

Information What to Provide
Brand ABB, FANUC, KUKA, Yaskawa, or other
Robot model Exact robot model or series
Controller model Controller type and generation
Product category Teach Pendant, Cable, PCB, Servo Drive, etc.
Visible numbers Every readable number or code
Photos Front, rear, side, connector, and label
Installation location Where the component is installed
Failure description What happened before replacement was needed
Quantity Required number of units

If possible, include a photograph of the original component still installed in the controller or robot system.

This can provide useful context when the component has no readable external label.

8. Common Mistakes When Identifying Robot Spare Parts

Even experienced maintenance and purchasing teams can make identification mistakes when working under time pressure.

Avoid these common problems:

Mistake 1: Using only the product name

A request such as "ABB FlexPendant" or "FANUC servo amplifier" may describe a broad product category.

It does not identify the exact replacement.

Provide the part number, model, and controller information whenever possible.

Mistake 2: Ignoring suffixes and revisions

A small suffix may distinguish different hardware or product configurations.

Always record the full identification number.

Mistake 3: Identifying a component by appearance alone

Two boards, cables, or Teach Pendants may look almost identical but have different electrical or mechanical specifications.

Use photos to narrow down the product, then verify the exact identification and compatibility.

Mistake 4: Photographing only the front

The most important identification label may be on the rear, side, or connector area.

Take multiple photographs before removing or discarding the original component.

Mistake 5: Confusing a board number with an assembly number

A PCB can contain several identification codes.

Make sure you know whether the number refers to the bare board, assembled module, or complete replacement unit.

Mistake 6: Ordering before compatibility is confirmed

An identified part is not automatically a compatible replacement.

Check the robot model, controller generation, hardware revision, and relevant technical specifications before placing the order.

9. How to Send Photos for Faster Spare Parts Identification

If you are requesting help identifying an industrial robot spare part, clear and complete photos can reduce unnecessary communication.

Before sending your request, prepare:

Product identification

Full product photo

  • Front and rear views
  • Clear nameplate or label photo
  • Close-up of all visible numbers

Technical details

  • Robot brand and model
  • Controller model
  • Hardware revision, if available
  • Connector photos
  • Installation location

Purchasing details

  • Required quantity
  • Preferred product condition
  • Destination country
  • Required delivery date

If the label is damaged, send the original photo anyway. Do not try to guess missing characters.

It is better to provide an incomplete but accurate identification request than an incorrect part number.

Frequently Asked Questions

1. Can an industrial robot spare part be identified from a photo alone?

Sometimes a photo can help identify the product category, manufacturer, or possible model.

However, a photo alone may not confirm the exact part number or compatibility. Clear label information, connector details, and controller data provide stronger evidence.

2. What if the part number on the nameplate is damaged?

Photograph the remaining label and provide the robot model, controller model, product appearance, and connector details.

A supplier may be able to help narrow down the identification using these details.

3. Is the serial number the same as the part number?

No. A part number identifies a product or component type, while a serial number generally identifies an individual manufactured unit.

Both can be useful, but they serve different purposes.

4. Can AI identify an industrial robot part from an image?

AI image recognition can help read labels, describe visible features, and suggest possible product categories.

However, it should not be treated as final compatibility verification. Always check the extracted part number and technical information against reliable product documentation or supplier confirmation.

5. What photos should I send when requesting a robot spare part?

At minimum, send a full product photo, a clear label photo, and close-ups of the connectors.

If available, also provide the robot model, controller model, and a photo showing where the component is installed.

6. Can I order a replacement if I only know the robot model?

You can start a sourcing request with the robot model and available photos.

However, the robot model alone may not identify the exact component. Additional information is usually needed before confirming a replacement.

7. What should I do if the original part is discontinued?

Ask the supplier to check for manufacturer-approved superseded parts or technically verified alternatives.

Do not assume that a newer revision or similar-looking component is interchangeable without supporting evidence.

Need Help Identifying an Industrial Robot Spare Part?

If you have a product photo, nameplate image, or incomplete part number, you can send the available information to InRobots for a sourcing inquiry.

We support identification and sourcing requests for industrial robot spare parts across major brands, including:

  • ABB

  • FANUC

  • KUKA

  • Yaskawa

Common product categories include:

  • Teach Pendants and Teach Pendant Repair Parts

  • Robot Cables and Teach Pendant Cables

  • Servo Drives and Servo Motors

  • Control Boards and PCB Modules

  • Power Supply Modules

  • Other industrial robot components

Send us the product photos, visible identification numbers, robot model, and controller information.

Even if you do not know the complete part number, the available details can help us begin reviewing the identification and sourcing options.

Submit Your Spare Parts Inquiry

🔧 Recommended Parts for

Key components commonly involved in issues and replacements.

No related parts found. Please check available components in our catalog.

Articles suivant How to Plan Urgent International Robot Spare Parts Orders

Laisser un commentaire

* Champs obligatoires

Articles de blog

Comparer les produits

{"one"=>"Sélectionnez 2 ou 3 articles à comparer", "other"=>"{{ count }} éléments sélectionnés sur 3"}

Sélectionnez le premier élément à comparer

Sélectionnez le deuxième élément à comparer

Sélectionnez le troisième élément à comparer

Comparer