A damaged display shouldn't mean an expensive full pendant replacement. At inrobots.shop, we specialize in high-precision HMI (Human Machine Interface) repair components. Most common faultscracked glass, "ghost" touches, dead pixels, or a dark backlightcan be permanently resolved by replacing the specific LCD panel or touchscreen digitizer.
This index provides a technical cross-reference between major robot brands (ABB, Fanuc, KUKA, Yaskawa, Comau) and their internal display spare parts.
1. Quick Identification: LCD vs. Touch Screen
Before sourcing parts, identify which component is failed:
-
Touch Screen Overlay (Digitizer): The top layer of glass. Replace this if the screen is cracked but the image is visible, or if the touch function is "dead" or drifted.
-
LCD Panel: The internal display. Replace this if you see black ink-like spots, vertical lines, or a completely white/black screen.
- Backlight Inverter: Replace this if you can see a faint image only when shining a flashlight on the screen.
2. ABB FlexPendant Display Spares
ABB pendants are known for high touch-sensitivity wear. We support all generations from S4C+ to IRC5.
| Pendant Model | Part Number | LCD Panel Type | Touch Screen Part |
|---|---|---|---|
| IRC5 (DSQC 679) | 3HAC028357-001 | 10.4" High-Contrast Color | 8-Wire Industrial Resistive |
| IRC5 (DSQC 648) | 3HAC023118-001 | 6.5" TFT LCD | 6.5" High-Durability Touch |
| S4C+ Pendant | 3HNE124-1 | 7.2" Mono/Color | Protective HMI Film |
👉 [View All ABB Display Parts]
3. Fanuc iPendant Display Spares
Fanuc screens are often exposed to welding sparks and grime. Replacing the protective overlay is a common preventative maintenance task.
| Pendant Model | Part Number | LCD Panel Type | Touch Screen Part |
|---|---|---|---|
| iPendant (R-30iB) | A05B-2255-C101 | 7.5" Color LCD | A05B-2255-C101#TS |
| iPendant (R-30iA) | A05B-2518-C202 | 7.4" TFT LCD | A05B-2518-C202#TS |
| Legacy Pendant | A05B-2301-C300 | 7.2" Monochrome | N/A (Keypad only) |
👉 [View All Fanuc Display Parts]
4. KUKA KCP Display Spares
KUKA units (particularly the KCP2) are notorious for backlight dimming after 5+ years of continuous service.
| Pendant Model | Part Number | LCD Panel Type | Touch Screen Part |
|---|---|---|---|
| SmartPad 1 & 2 | 00-168-334 | 8.4" High-Res TFT | Multi-Touch Capacitive Glass |
| KCP2 (Ed05) | 00-110-185 | 8.4" VGA LCD | 4-Wire Resistive Touch |
| KCP1 (Standard) | 00-107-753 | 8.0" Color STN | N/A (Keypad only) |
👉 [View All KUKA Display Parts]
5. Yaskawa Motoman Display Spares
The NX100 and DX100 series use Windows CE-based displays that require precise touch calibration after replacement.
| Pendant Model | Part Number | LCD Panel Type | Touch Screen Part |
|---|---|---|---|
| DX100 / DX200 | JZRCR-YPP01-1 | 5.7" Color TFT | 5.7" Industrial Touch |
| NX100 | JZRCR-NPP01-1 | 5.7" STN Color | 5.7" 4-Wire Overlay |
👉 [View All KUKA Display Parts]
6. Repair FAQ & Installation Tips
Q: Can I replace just the touch glass, or do I need the whole LCD?
A: Yes. If your image is perfect but the glass is shattered, you only need the Touch Screen Overlay. This saves significant cost compared to buying a "bonded" assembly.
Q: Is soldering required for these repairs?
A: For modern units (IRC5, R-30iB, KRC4), most screens use ZIF ribbon connectorsno soldering required. However, older legacy systems may require soldering for backlight power leads.
Q: Do you offer a "Repair Service" if I don't want to do it myself?
A: We offer a Full Teach Pendant Refurbishment Service. Send us your damaged unit; we will replace the screen, joystick, and seals, then return it fully tested with a warranty.
7. Technical Matching Service
Cant find a part number match? Screen manufacturers like Sharp, Kyocera, and Mitsubishi often use internal codes that differ from the Robot OEM.
- Snap a Photo: Open your pendant and photograph the sticker on the back of the LCD panel.
- Submit to Tech Support: Send the photo to our team.
- Get a Match: We will identify the compatible industrial equivalent and provide a DIY installation guide.